The accuracy can be 99.9% in good weather, 99.5% in bad weather.
The scanning mode of the separator is high-speed synchronous progressive scanning mode, the separator can resist the direct light as much as 40000LUX,and eliminate the strong light interference and electromagnetic interference completely .
The infrared vehicle separator can detect the malfunctions automatically when there is mud or dust on the photocell, continue to work well by ignoring the abnormal light beam and give the alarm signal at the same time. It will go back to normal working condition when all the malfunctions are solved .
The infrared vehicle separator has special protective shell ,specially-made heating device, temperature control device. The heating device can remove the condensation, frost and vapour automatically in the cold season,then the operating temperature will be controlled within the range of 7 ℃~55 ℃.
1.Screen height: 140mm~2880mm
2.Detection distance: 0~10m
3.Environment temperature: -30℃~+65℃
5.No blind area
6.Anti -interference, such as ambient light, electrostatic, the welding arc, flash lamp.
7.The infrared vehicle separator can be connected in series up to 4 sets
8.Two PNPOSSD outputs are compatible with PLC
9.Response time: 8~43ms
10.Anti-vibration, highly reliable built-in circuit
11.Maximum relative humidity: 99%（50℃）
12.Degree of protection: IP65